Modify mountain bike to sound like good cars

1. Length on the pipes

In technicians room
This is the heart of the bike look simple when you choose cycling and cars that were pulling the shoulders forward, it is too long bike cars. In contrast, if your back stoop curve. Show that the pipe is too short. You should change the size of two new cases.

Set itself
Check yourself by looking through the mirror while you are on a trial spin.



2.Modify high/low of saddle

In technicians room
Mountain Bike is a set of saddle slightly lower than road bike to increase the power of manipulation in the lower.

Set itself
-Customize your saddle height and hip while still on a trial spin.
-Then shorten again about 3-5 mm for a Mountain Bike ride.

3. Refinements in the front saddle and rear saddle.

In technicians room



-Road Bike plumb through the same knee, but have reached the end of pedal shaft fit.
-If the saddle is as valid as the middle stretch fit.
-If required to move violently forward rather represents a pipe sitting under Limited. Degree pipe less than 72 degrees sitting will tend to make the ride back.
-Level of saddle should consider the level of the floor or parallel decline 1-2 degrees.

4. Width of handlebar

In technicians room
Generally, the handlebar-mounted vehicles often too broad. Time to consider cutting off 1 / 4 inch.

Set itself
-Considerations are. Width of the shoulders. You can breathe easy if the handlebar wide enough to make your breasts while fully extended inhalation.
-Width is appropriate. Period between the end of the ridge side second place fist attached outer thigh.

5. Frame size
-If chosen correctly will be filed against pillars saddle pipe sitting in the 7-9 inch range.
-Size of frame is identified. Small / medium / large. More to consider on the pipe length and the vertical distance from the end of the handlebar, the saddle should be in the range of 0-3 inches.