Thursday, August 13, 2009

Mountain Bike Handlebar

Handlebar has two types.

Mountain bike handlebar
First is a straight (a little curve) for the path that does not last long downhill. Approximately 21-23 inches in length, a range of western shoulder. Should cut the end of the 2 left side to equal the width of shoulder range of rider. That when both hands touch, two side arms should be in a parallel manner. If the arms stretch out wider. The elbow to the difficult Turn force and not flexible. If the arms are forced to narrow ravine car shot Not filled lungs and breathing. Range for women is narrower than the range of shoulder hip Cut ends should handle the remaining length to fit the amplitude of hip.

Mountain bike handlebar
Second is DOWNHILL type is a similar pinion Not much can be cut at the end. It must be long enough to install the. Hand brake (Brake Lever) Mobile Gear (Shift Lever) and a variety of devices. Adjust the tilt angle of indication of the hands. Should rotate the handle end to handle the next 2 points to the trail rider's shoulder. Time to use grip handle. Wrist is not a symptom of the very hands tea. And a hands-on neck with hands. Lower level should be injured by approximately 1-4 cm long, flexible range of arms. If the rough conditions. Hands should grip the bike is just plain loose-chopsticks. The suspension is packed bundle in situation when the channel is prone to rain, soil or sand should slither down lower center of gravity. The lifting haunch. Then use the legs lightly injured in the head pin. To the weight to the head set (Bottom Bracket), a rotation of the disk set (Crank Set) with the elbow and the knee slightly. Wait substrate strength to bounce.

No comments:

Post a Comment